A correctly installed alarm prevents false alarms, covers the right entry points, and stays armed because it's easy to use. We design, install and program alarm systems for homes and businesses across Perth Metro.
Most alarm system failures are installation failures. Sensors placed in the wrong location, zones configured for convenience rather than coverage, arming modes set up incorrectly — the result is a system people stop using because it's unreliable or generates too many false alarms. With 21+ years of field experience across residential and commercial properties, our installations are designed around how the property is actually used.
Every sensor position is chosen based on entry point priority, movement patterns, and false alarm risk — not based on what's easiest to cable.
Zones are mapped to how you use the property. Perimeter-only arming for when you're home, full interior arming when away — without complexity that leads to disuse.
Entry/exit delays, user codes, mobile app setup, alert pathways and monitoring integration all configured before we leave. Nothing left for you to figure out.
We work with a focused set of proven brands. Each has a different profile — we'll recommend the right one based on your property type, zone count, and whether wireless or hardwired suits your situation.
Our most recommended wireless platform. 868MHz encrypted protocol, Grade 2 EN50131 certified, hub-based architecture with 4G and Ethernet backup. Suits homes and medium commercial where cable runs aren't practical.
Industry-standard hardwired systems used across commercial and enterprise installs. Solution 2000, 3000 and 6000 series. Reliable, well-supported, integrates with access control and monitoring platforms.
Proven hardwired panels widely used in residential and light commercial. PowerSeries Neo and Pro series. Strong monitoring centre compatibility and field-tested reliability over decades.
Australian-market alarm systems with local distributor support. A practical choice for straightforward residential installs with good monitoring centre integration and local technical backup.
Hikvision's wireless alarm platform using the same encrypted 868MHz protocol as Ajax. DS-PWA32, DS-PWA64, and DS-PWA96 panels. A cost-effective wireless option for residential installs.
Feature-rich panels for residential and commercial. EVO, SP and MG series. Strong zone capacity, good mobile integration, and a broad sensor ecosystem for larger or more complex installs.
Not sure which brand suits your property? See our full alarm systems guide or call us to discuss.
Residential installs are designed around your household — including pets, movement habits through the property, and which entry points carry the highest risk. Common mistakes we correct when taking over existing systems include sensors triggered by aircon units, incorrect delay timings causing false alarms, and perimeter gaps on less-obvious entry points like sliding doors and skylights.
Commercial installs add complexity around multi-user access, operational hours, and integration with other security systems. We handle zoning for after-hours security staff, duress pathways for cash-handling environments, and time-based arming profiles so the system works around your trading pattern rather than against it.
See commercial alarm systems Perth for more detail on business-specific installations.
We walk the property and identify every entry point, movement path, and risk zone. Existing alarm components are checked if present. We determine whether wired, wireless, or hybrid installation suits the property, and confirm the control panel location and cabling routes.
Before a single sensor goes up, we map out the zone structure. Perimeter zones cover doors and windows. Interior zones cover movement paths. We assign arming modes — away, home/night, and partial — so the system has a mode for every scenario you'll actually face.
Control panel, keypad, sensors, siren and any additional devices are installed and connected. Cable runs are kept neat and routed sensibly. Wireless sensors are mounted and paired. Tamper protection is verified on every device.
Entry and exit delays, user codes, zone labels, alert pathways, and mobile app connectivity are all programmed and tested. If monitoring is included, the communicator is registered and contact pathways confirmed with the monitoring station.
Every sensor is triggered and verified in walk-test mode. Alert signals are confirmed end-to-end. False alarm sources — RF interference, incorrect PIR angles, direct sunlight exposure — are identified and corrected before signoff.
We walk you through arming, disarming, and every mode on the system. User codes are set. Mobile app is confirmed working. You leave knowing exactly how to use the system confidently — because a system that's confusing to use is a system that doesn't get armed.
Most residential alarm installations take 4–8 hours depending on the number of zones, whether the property is new build or existing, and how much cable needs to be run. Larger commercial installations may take a full day or span two visits.
No. Monitoring is optional. We install alarms that operate as standalone systems with local siren, mobile push notifications, or both. Central station monitoring is available if you want 24/7 backup response, but it is not a requirement of installation.
We install Ajax, Bosch, Ness, DSC, Hikvision AX Pro and Paradox alarm systems. Brand selection depends on your property type, zone count, and whether wireless or wired installation suits your situation. We recommend the right system after assessing your property.
Yes. Wireless alarm systems like Ajax and Hikvision AX Pro use encrypted radio frequency communication between sensors and the control panel, so no data cabling is required through walls or ceilings. The control panel still needs a 240V power connection and a backup battery is included.
It depends on your floor plan and risk profile. A standard 3–4 bedroom home typically needs door and window sensors on all entry points, plus PIR motion detectors covering internal movement paths. We design zones around how you actually use your home, including pet-immune configurations where relevant.
Yes, both. New builds allow for neater cabling during construction before walls are closed. Existing homes are handled with surface-run or concealed cabling depending on access and preference, or wireless systems where cabling is not practical. We work around the property as it stands.
We'll assess your property, recommend the right system, and provide a written quote. No obligation.